 |
CAC Page: < 1 | 2 >
Specifications
- Copper Foil
CAC is available with Gould's proven and proprietary JTC copper foil in the following thicknesses and weights. Other thicknesses and foil types, such as Reverse Treated, Low Profile and Double Treated Foil, are available upon request.
| Copper Weights |
| 9 µm |
0.25 oz |
| 12 µm |
0.375 oz |
| 18 µm |
0.5 oz |
| 35 µm |
1.0 oz |
| 70 µm |
2.0 oz |
| 105 µm |
3.0 oz |
| 140 µm |
4.0 oz |
- Aluminum Separators
Gould selects the best aluminum alloys for use as CAC lamination separators. All aluminum used is hardened, to meet the demanding requirements of today's lamination and drilling processes.
Aluminum Separator Thickness
Aluminum separators are available in the following thicknesses
with tolerances of +/- 0.025 mm (0.001") |
| 0.18 mm |
0.007" |
| 0.25 mm |
0.010" |
| 0.30 mm |
0.012" |
| 0.38 mm |
0.015" |
| 0.50 mm |
0.020" |
- Other Separators
Other metal separators are available upon special request.
- CAC® Lamination Foil
CAC is available in a double sided version known as CAC Lamination Foil (with copper foil on both sides of the aluminum separator), as well as in a single sided version (as CA® Lamination Foil and AC Lamination Foil).
CAC sheets can be supplied in varying sizes with and without registration holes according to the widespread varieties of customer specifications.
General Processing Guidelines
For best results, refer to the supplier's recommendations for lamination conditions. An example of a lamination cycle follows.
|
|
